电力电缆石家庄电线电缆生产厂家直销YJV国标铜芯电力电缆 产品标准 Standard of Product 本产品按GB/T 12706-2008《额定电压1KV(Um=1.2KV) 到35Kv(Um=40.6KV)挤包绝缘电力电缆及附件》标准生产,同时还可根据用户需要按国际电工**推荐IEC标准、英国标准、德国标准及美国标准生产。 The product is manufactured according to the standards of GB/T 12706-2008。At the same time ,it can also be manufactured according to IEC, BS, DIN and AEIC upon request. 适用范围 Application 本产品适用于工频额定电压0.6/1kV及以下配电网或工业装置中固定敷设之用。 The product is suitable for power distribution lines or fixed installation with rated power- frequency voltage up to and including 0.6/1kV. 使用特性 Operating Characteristics 工频额定Uo/U为0.6/1kV。 Rated power-frequency voltage Uo/U is 0.6/1kV. 电缆导体允许长期较高工作温度为90℃。 Max. permissible continuous operating temperature of conductor is 90℃. 短路时(较长持续时间不**过5s)电缆导体的较高温度不**过250℃。 Max. temperature of conductor during short circuit (5s maximum duration ) shall not exceed 250℃. 电缆敷设时环境温度应不低于0℃。 The ambient temperature under installation should not below 0℃. 电缆弯曲半径:单芯电缆不小于电缆外径20倍;三芯电缆不小于电缆外径15倍。 The bending radius of a single-core cable: not less than 20 times of cable’s OD The bending radius of a three-core cable: not less than 15 times of cable’s.OD